DBF Competition 2011

Check back for Design Build Fly competition photos going on this week.

In Tucson!

We have successfully made it to Tucson, and all the aircrafts and supplies have made it safely! Time to unpack and get started.

GO BLUE DAWN!

Final Planes Getting Packed

We're just about ready to go, just a few more things to pack up. The planes are getting shipped in the morning, so wish us luck!

Test Flight - Blue Dawn

The team has completed the final competition Blue Dawn aircraft. "The Ninja" is ready for Tucson!

Wind Tunnel Testing

The Propulsion team was finally able to use the wind tunnel to do some propeller testing. This video shows one such test.

7G's!!!

It's a little too soon to celebrate but we can successfully say that the as designed wings for this years plane can stand a 7G load! Check out the video to see the breaking of our wing.

Things are coming along well and hopefully we will have Prototype 1 flying soon!


The Structures Group.

UK DBF 2011

Once again the University of Kentucky has chosen to participate in the American Institute of Aeronautics and Astronautics's (AIAA) Design Build Fly (DBF) competition as a senior design project. The senior design group consists of 4 teams of 4 seniors- Structures, Aerodynamics, Propulsion, and System Integration.

This year's competition has a Military theme, including being a handed launched UAV.

This year's missions include:

• Mission 1-Dash to a Critical Target
• Distance: 4 minutes to complete maximum possible number of laps


• Payload: Empty


• Score: Team's Laps, Maximum Number of Lap's




• Mission 2- Ammo Re-Supply
  
• Distance: 3 Laps


• Payload: 3x4 inch steel bar


• Score: Bar Weight, Flight Weight




• Mission 3- Medical Supply Mission


• Distance: 3 Laps


• Payload: Golf Balls


• Score: Number of Balls, Maximum number of Balls

Other mission requirements include:

• 3 hand launched attempts equal 1 flight attempt


• 3/4 pound battery limit


• The plane and payloads must fit into a commercially available carry on suitcase.


• No one dimension can be greater than 22 inches


• The sum of the dimensions cannot be greater than 45 inches.

Good luck to the 2011 and all future UK-DBF Teams

NEW RULES POSTED!

They're finally here!! The rules for the 2010/2011 DBF competition have been posted!! Stay tuned for information on next years team.

2009:

2010:

2011:

Its Been Fun, Its Been Real

We here at UK's Design Build Fly team would just like to say a few words to express our gratitude to everyone who contributed this year. Although the competition score may not reflect it, we were able to make great strides and improve tremendously. We were able to learn and apply more complicated plane building skills, and implemented a defined process for thrust component testing. We had a well designed plane, and hopefully next year's team will continue making leaps forward and take UK into the top 10!

Going forward we are scheduling flights for the missions we were not able to fly at the competition, and continuing to prepare for next year's team. For any prospective students out there that are on the fence or have questions, the team leaders from this year's team would be glad to field your questions:

Brady Doepke - Chief Engineer - e.brady.doepke@gmail.com

Michael Thamann - Aerodynamics Team Leader - matham2@uky.edu

Jesse Downard - Propulsion Team Leader - Jesse.Downard@uky.edu

Joe Renfrow - Structures Team Leader - wjrenf2@uky.edu

Once again thanks for everything especially our sponsors - for without your help we could achieve nothing, and our team members - hopefully your hard work and late nights have been as rewarding as we hope, and you too Dr. Smith.

Sincerely,

Official Score

The official scores were finally posted. Our final score for the competition was 36th overall.

There were 65 teams that showed at the competition and completed tech inspection, 46 of which had a successful scoring flight. The result was not what we had hoped but our team had made several improvements from last year, and we now know what we have to do keep improving for future teams.

Finally a scoring flight!

This morning we finally got called to fly again. This time we were prepared. The wind was calm and our plane was fast. We veered to the right during takeoff which led Brady to jam the throttle and caused a very short takeoff roll, but the plane handled it quite well. It quickly got up to speed and sped through the first turn but during the first reverse turn there was what seemed to be a stall causing a sudden dive, but Brady recovered nicely and sped through the rest of the flight. Our Final flight time was 1:28 which was one of the faster flight times for the mission.

Unfortunately that was the last opportunity we had to fly during the competition. the competition was officially ended with us 4th in line to fly . So unfortunately thats how it ended, with only one successful flight...

Competition Day 2

We returned this morning to be re-tech inspected and this time finally passed. While waiting to be re-inspected we happened to miss an opportunity to fly, so we had to wait until near the end of the day to fly. However, this didn't end as well as we'd planned either. Our motor controller got switched with one that not been programmed correctly so it prevented us from getting enough power to get off the ground. so end of day 2: still no flights.

Let The Games Begin!

Today was the first day of the competition, which consists of the tech inspection. Unfortunately it did not go as well as we'd hoped... the judges wanted us to reinforce a few parts of our plane so we had to return to the hotel to get it fixed up. We will have to return on Saturday to be re-tech inspected before we're able to fly...

Off To Wichita!

Wish us luck at the competition everybody!! We'll keep you posted about how everything's going!

Practice, Practice, Practice...

we have been continuing to make adjustments to the plane/controller to reduce twitchy-ness during flight and allow for smoother turns. You can see the difference in the plane's flights below as a result of the adjustments

This is after some of the adjustments were made...

SUCCESSFULL FLIGHT!!!!!!!!

Prototype 2 was flown successfully today at RJ Corman's airfield!!

Come join us at Pazzo's for the celebration!!!

PROTOTYPE 2 COMPLETE IN 7 DAYS!!!

With a lot of hard work and long days, the second prototype has been completed in seven days! New tools were created to ensure the wings are mounted properly to help prevent another crash, and the stability margin has been reduced to make the plane more responsive. Thanks to everyone on the team who contributed their time and effort into making this happen!

Prototype 1 First Flight Attempt

Prototype was flown for the first time today after several attempts which were thwarted due to problems with the front landing gear. Unfortunately the results were not as good as we hoped. The plane had some fundamental problems which were discovered during flight. The plane took off very steadily then climbed and started turning left. When it finally reached altitude it continued to yaw left despite the pilot applying full right aileron until it ruddered into a corkscrew dive which was un-recoverable. The flight video is below.

A post crash analysis found the wings were mounted at the incorrect angle and the plane was also overly stable. A new prototype has begun construction immediately to correct these issues.

E-Day a success, report finished, and first flight scheduled!!!

With everyone's help we were able to complete Prototype 1 in time for E-day, making for a successful event! A special thanks goes to all who lent their hands and minds to the design/manufacture of the plane as well as setting up for E-Day. We had lots of visitors throughout the day with a lot of great questions and received tons of support. It was great to see all the people stop by and wish us luck on the competition, and admire our creation. Here are some photos below from throughout the day:

Also another major milestone has been passed with the completion of the competition report. After many sleepless nights and contributions from several individuals (including Dr. Smith and Dr. Lebeau who helped provide several revisions) the report was submitted Monday March 1st with one day to spare before the deadline. All thats left now is more prototypes, and continuous flight testing!!

On that note, the first flight has been scheduled for Monday March 8 at approximately noon. The results of the first flight are being anxiously awaited, and will be posted as soon as possible!!

Thanks again for all your support!!